Exit locks
Products
Filter
8 results
Exit lock LE185
Exit lock case with automatic deadlocking latchbolt for wooden doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocking, latchbolt protrudes 17 mm
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt is retained inside the lock case.
LE185X is the microswitch version of the lock.
The switch changes the status when latchbolt is protruded from 14 mm to 17 mm.
Following striker plates are recommended to be used with microswitch version: 4692, 4693.
Striker plateLP711, LP714, LP721, LP731
FinishFe/ZL
CylinderABLOY. C, N, T, U
Fire resistance–
Mortise standardOneFit mortise
Exit lock LE186
Exit lock case with automatic deadlocking latchbolt for the active side of wooden doors with two blades.
The door is opened from outside with a door pull.
The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocking
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt is retained inside the lock case.
LE186X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Passive lock caseEXH911, EXB911, EXH915
FinishFe/ZL
CylinderABLOY. C, N, T, U
Fire resistance–
Mortise standardOneFit mortise
Exit lock LE314
Exit lock case with automatic deadlocking latchbolt for profile doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The lock is deadlocked always when the door is closed.
The latchbolt protrudes 14 mm.
LE314X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistanceEI115-EI160 and EI215-EI260
Exit lock LE315
Exit lock case with automatic deadlocking latchbolt for profile doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocked
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt is retained inside the lock case.
LE315X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistanceExit lock LE181
Exit lock case with automatic deadlocking latchbolt for the active side of wooden doors with two blades.
The door is opened from outside with a lever handle.
The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocking
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Day latching, the lock can be opened from outside by lever handle also
LE181X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Passive lock caseEXH911, EXB911, EXH915
FinishFe/ZL
CylinderABLOY. C, N, T, U
Fire resistance:Wooden doors EI115 - EI130 and EI215 – EI230,
Metal doors EI115 - EI1120 and EI215 – EI2120
Mortise standardOneFit Mortise
Exit lock LE184
Exit lock case with automatic deadlocking latchbolt for wooden doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The lock is deadlocked always when the door is closed.
Latchbolt protrudes 17 mm.
LE184X is the microswitch version of the lock.
The switch changes the status when latchbolt is protruded from 14 mm to 17 mm.
Following striker plates are recommended to be used with microswitch version: 4692, 4693.
Striker plateLP711, LP714, LP721, LP731
FinishFe/ZL
CylinderABLOY. C, N, T, U
Fire resistance:Wooden doors EI115 - EI130 and EI215 – EI230,
Metal doors EI115 - EI1120 and EI215 – EI2120
Mortise standardOneFit mortise
Exit lock LE310
Exit lock case with automatic deadlocking latchbolt for profi le doors with one blade.
The door is opened from outside with a lever handle.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocked, the lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Day latching, the lock can be opened from outside by lever handle also.
LE310X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistanceEI115-EI160 and EI215-EI260
Exit lock LE180
Exit lock cases with automatic deadlocking latchbolt for wooden doors with one blade.
The door is opened from outside with a lever handle.
The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocking, latchbolt protrudes 17 mm
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt protrudes 14 mm. The lock can be opened from outside by lever handle also.
LE180X is the microswitch version of the lock.
The switch changes the status when latchbolt is protruded from 14 mm to 17 mm.
Following striker plates are recommended to be used with microswitch version: 4692, 4693.
Striker plateLP711, LP714, LP721, LP731
FinishFe/ZL
CylinderABLOY. C, N, T, U
Fire resistance:Wooden doors EI115 - EI130 and EI215 – EI230,
Metal doors EI115 - EI1120 and EI215 – EI2120
Mortise standardOneFit mortise
