Standard locks

Lock case with an automatically deadlocking latchbolt. The deadlocking is controlled by a snib in the forend.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lock can be opened only with a key or a thumbturn.

DOWN = Latchbolt protrudes 14 mm.

The lock can also be opened with the lever handles.

4190X is the microswitch version of the lock.

The switch changes it’s status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY. C, N, T, U

Wooden doors EI115 – EI160 and EI215 – EI260,

Metal doors EI115 – EI1120 and EI215 – EI2120

SFS 5209.

Lock case with an automatically deadlocking latchbolt. 

The latchbolt protrudes to 21 mm when the door is closed.

The lock has no lever handle operation.

The bolt is opened with either a key or a thumbturn. 

4194X is the microswitch version of the lock.

The switch changes it’s status when the bolt has protruded to 15 mm or more.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, 

Fe/ZL

ABLOY^® C, N, T, U 

Wooden doors EI115 – EI160 and EI215 – EI260, Metal doors EI115 – EI1120 and EI215 – EI2120

SFS 5209.

4195 Lock case with an automatically deadlocking latchbolt. 

The latchbolt can be retained inside the lock case.

Dead-locking is controlled by a snib in the front plate. 

The lock has no lever handle operation.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lock can be opened only with a key or a thumbturn.

DOWN = Latchbolt is retained inside the lock case. 

The door is kept closed by using a door closer.

4195X is the microswitch version of the lock.

The switch changes it’s status when the latchbolt leaves its day locking position, i.e. the bolt protrudes 15 mm or more.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

–

SFS 5209

Lock case with a cylinder function for fire doors.

The lock is opened by a key or a thumbturn.

The non-deadlocking latchbolt protrudes 14 mm.

The lock can also be used with electromechanical striker plates.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693

4690, 4691, LP711, LP714, 

Fe/ZL

ABLOY^® C, N, T, U

Wooden doors EI115 – EI160 and EI215 – EI260, Metal doors EI115 – EI1120 and EI215 – EI2120

SFS 5209.

Lock case with an automatically deadlocking hookbolt for folding and sliding doors.

The deadlocking is controlled by a snib in the forend.

UP = Deadlocking, when the door is closed.  The lock can be opened with a key or a thumbturn.

DOWN = Hookbolt is retained inside the lock case.

Fe/ZL

ABLOY^® C, N, T, U

–

SFS 5209

Lock case with an automatically deadlocking latchbolt. 

The lock must always be equipped with handles, as the latchbolt is retracted with the handles only.

The deadlocking is controlled by a snib in the forend. 

When the snib is in deadlocking mode, the door is opened by turning the outside key 180° or the inside thumbturn 90°. 

The handles are then activated, and the latchbolt can be retracted.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lever handles are activated by the key or the thumbturn.

DOWN = Latchbolt protrudes 14 mm. 

The door is opened with the lever handles.

The lock case LC100 is fitted with a feature to prevent  unauthorized use of the snib.

The snib is locked to the deadlocking mode by turning a set screw, located below the snib, about two turns anticlockwise by a hexagonal key, until the screw stops and is opened by turning the screw clockwise.

LC100X is the microswitch version of the lock.

The switch changes it’s status when the bolt has protruded to 21 mm.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693. 

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

Wooden doors EI115 – EI160 and EI215 – EI260, Metal doors EI115 – EI1120 and EI215 – EI2120

SFS 5209

Cylinder lock case with an automatically deadlocking latchbolt. 

The lock must always be equipped with handles on both inside and outside.

The deadlocking is controlled by a snib in the forend. 

When the snib is in deadlocking mode, the door is opened by turning the outside key 180° or the inside thumbturn 90°.

The handles are then activated, and the latchbolt can be retracted.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lever handles are activated by the key or the thumbturn.

DOWN = Latchbolt protrudes 14 mm.

The door is opened with the lever handles. 

The lock case LC102 is fitted with a feature to prevent  unauthorized use of the snib.

The snib is locked to the deadlocking mode by turning a set screw, located below the snib, about two turns anticlockwise by a hexagonal key, until the screw stops and is opened by turning the screw clockwise.

LC102X is the microswitch version of the lock.

The switch changes it’s status when the bolt has protruded to 21 mm.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

Wooden doors EI115 - EI1 30 and EI215 – EI2 30, Metal doors EI115 - EI1120 and EI215 – EI2120

OneFit mortise.

A cylinder lock case with an automatically deadlocking latchbolt. 

The latchbolt is deadlocked when both triggering bolt and latchbolt are retained inside the lock case.

The deadlocking is controlled by a snib in the forend.

The lock case is fitted with at feature to prevent unauthorized use of the snib.

The snib can be moved by turning first the key or thumbturn.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lock can be opened only with a key or a thumbturn.

DOWN = Latchbolt protrudes 14 mm.

The lock can also be opened with the lever handles.

LC190X is the microswitch version of the lock.

The switch changes it’s status when the latchbolt protrudes 21 mm.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

Wooden doors EI115 - EI130 and EI215 – EI230, Metal doors EI115 - EI1120 and EI215 – EI2120

OneFit mortise

Cylinder lock case for emergency exits.

The latchbolt deadlocks automatically when the door is closed, protruding 21 mm.

The lock case is suitable for use with a double cylinder and an emergency exit thumbturn.

The bolt is opened with either the key or the emergency thumbturn.

LC193X is the microswitch version of the lock.

The switch changes it’s status when the latchbolt protrudes 21 mm. 

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U

Wooden doors EI115 - EI130 and EI215 – EI230, Metal doors EI115 - EI11120 and EI215 – EI2120

OneFit mortise

Lock case with an automatically deadlocking latchbolt.

The latchbolt is deadlocked when both triggering bolt and latchbolt are retained inside the lock case. 

Deadlocking is controlled by a snib in the front plate.

The lock cases fitted with at feature to prevent unauthorized use of te snib. 

The snib can be moved by turning first the key or thumbturn.

The lock has no lever handle operation.

UP = Deadlocking, latchbolt protrudes 21 mm.

The lock can be opened only with a key or a thumbturn.

DOWN = Latchbolt is retained inside the lock case.

LC195X is the microswitch version of the lock.

The switch changes it’s status when the bolt protrudes 21 mm.

Following striker plates are recommended to be used with a microswitch locking box: 4692, 4693.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

– 

OneFit mortise

Cylinder lock case with a cylinder function for fire doors.
The lock is opened by a key or a thumbturn.

The non-deadlocking latchbolt protrudes 14 mm.

The lock can also be used with electromechanical striker plates.

4690, 4691, LP711, LP714, LP721, LP731

Fe/ZL

ABLOY^® C, N, T, U 

Wooden doors EI115 - EI130 and EI215 – EI230, Metal doors EI115 - EI11120 and EI215 – EI2120

OneFit mortise