Interior door locks
Products
Exit lock LE310
Exit lock case with automatic deadlocking latchbolt for profi le doors with one blade.
The door is opened from outside with a lever handle.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocked, the lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Day latching, the lock can be opened from outside by lever handle also.
LE310X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistanceEI115-EI160 and EI215-EI260
Exit lock LE314
Exit lock case with automatic deadlocking latchbolt for profile doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The lock is deadlocked always when the door is closed.
The latchbolt protrudes 14 mm.
LE314X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistanceEI115-EI160 and EI215-EI260
Exit lock LE315
Exit lock case with automatic deadlocking latchbolt for profile doors with one blade.
The door is opened from outside with a door pull.
The lock case fulfi ls the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.
The lock is always opened from the inside by a lever handle, push pad or panic bar.
The latchbolt protrudes 14 mm.
Deadlocking is controlled by a snib in the front plate.
Using of the snib is normally blocked.
The snib is released by turning the key.
Snib position:UP = Deadlocked
The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.
DOWN = Latchbolt is retained inside the lock case.
LE315X is the microswitch version of the lock.
The switch changes the status when latchbolt is deadlocked.
Striker plateLP702, LP703
FinishFe/ZL
CylinderABLOY. C, N, T, U,
Fire resistance–
Interior door lock 2011
Lever lock for interior doors.The lock features 5 levers to give 250 different key combinations.
Lock handing can easily be changed by pulling out the latchbolt and turning it 180° clockwise.
The lock is fitted with lever handles and an escutcheon.
The lock can also be eguipped with DIN standard fittings.
Striker plate0043, 0045, 0053, 0055, 0068,0068B
FinishFe/Zn, Fe/Mme
Fire resistanceYes
Mortise standardSFS 5210, SS 81 73 82
Interior door lock 2014
Interior door lock 2018
Cylinder lock for interior doors.
The lock can be opened and locked by turning the key one turn.
In locked position, the deadbolt protrudes 14 mm.
The latch can be retracted both by handles or by key.
Lock handing can easily be changed by pulling out the latchbolt and turning it 180° clockwise.
Striker plate0043, 0045, 0053, 0055, 0068, 0068B
FinishFe/Mme, Fe/ZL
Fire resistanceYes
CylinderEuro DIN
Mortise standard,Special mortise
Interior door lock 2020
Lock for interior doors. It has one latch bolt which can be deadlocked with either a key or a toilet thumbturn.
Lock handing can easily be changed by pulling out the latchbolt and turning it 180° clockwise.
The lock can be used with a lever handle only or with both a lever handle and a key or a toilet thumbturn.
The lock fits into the same mortise as e.g. ASSA 404 and 404T.
2020 replaces the following old lock types:BODA 408-409-418-420-422-423-448-501-502-503 and ASSA 404 and 404T
Striker plate0043, 0045, 0053, 0055, 0068, 0068B
FinishFe/Mme
Fire resistanceYes
Mortise standardSFS 5210, SS 81 73 82
Interior door lock 4238
Symmetric roller latch.
The roller latch protrusion can be ad-justed by means of a screw in the front plate.
The door must have a door pull.
For reasons of safety, a special striker plate is used in conjunction with the roller latch.
Striker plate0046, 0078
FinishZNALCU/Mme
Fire resistance–
Mortise standardSFS 5210, SS 81 73 82
Interior door lock 4249
Lock case for lightweight sliding and folding doors.
The hookbolt can be locked. Either by using a key or toilet thumbturn.
Striker plate4662
FinishFe/Mme
Additional finishFe/Cr, Fe/HCr, Ms/HaLa, Ms/KiLa, Rst
Fire resistance–
Mortise standardSFS 5210, SS 81 73 82
Interior door lock 4260
Cylinder mortise lock with an automatically deadlocking latchbolt for interior doors.
Deadlocking is controlled by a snib in the front plate.
Snib position:UP = Deadlocking, latchbolt protrudes 20 mm.
The lock can be opened only with a key or a thumbturn.
DOWN = Latchbolt protrudes 14 mm.
Lock can also be opened with lever handles.
Striker plate0043, 0045, 0053, 0055, 0068, 0068B
FinishFe/Mme, Fe/Zn
CylinderABLOY® C, N, T, U
Fire resistance–
Mortise standardSFS 5210, SS 81 73 82
Interior door lock 4290
Mortise lock with a lever handle function.
Recommended for public buildings.
Striker plate4690, 4691, LP711, LP714, LP721, LP731
FinishFe/ZL
Fire resistance:Wooden doors EI115 – EI160 and EI215 – EI260, Metal doors EI115 – EI1120 and EI215 – EI2120
Mortise standardSFS 5209
Interior door lock 4291
Mortise lock for toilet doors in public buildings.
The lock is suitable for use with lever handles and a toilet thumbturn.
Striker plate4690, 4691, LP711, LP714, LP721, LP731
FinishFe/ZL
Fire resistance:Wooden doors EI115 – EI160 and EI215 – EI260, Metal doors EI115 – EI1120 and EI215 – EI2120
