ABLOY Padlock Security Grades

ABLOY Padlocks have been designed and manufactured to not only meet the requirements of the EN12320 padlock standard, but exceed as the requirements of our own tests are significantly higher. ABLOY Padlocks continued to operate smoothly throughout exhaustive durability tests such as the acetic acid salt-spray test – they are therefore the best possible alternative for use in unprotected locations where the environmental conditions are severe.

Abloy Oy has paid particular attention in design of environmentally-friendly production methods. As a result we use the most modern and environmentally-friendly surface plating facility in Finland.

All the operations are qualified with the ISO9001 and ISO14001 certifications.
Requirements 1 2 3 4 5 6  
Minimum number of differs 300 1000 2500 5000 10000 20000  
Pulling of shackle/staple 3 5 15 30 70 100 kN
Twisting of shackle/staple 40 100 200 450 1200 2500 Nm
Cutting of shackle/staple 6 15 25 35 70 100 kN
Blow on shackle/staple (weight/g x height/mm) Test temperature     1250 x 800
-20°C		 3050 x 1000
-20°C		 6550 x 1400
-40°C		 7150 x 1500
-40°C		 x5 times
Blow on lock body (weight/g x height/mm) Test temperature     1250 x 800
-20°C		 3050 x 1000
-20°C		 6550 x 1400
-40°C		 7150 x 1500
-40°C		 x5 times
Load on cylinder plug or locking mechanism     4 5 10 15 kN
Drilling       2 4 8 min
Sawing       2 4 8 min
Torque resistance of cylinder plug     5 15 20 30 Nm

Additional Information