Exit lock LE181

Exit lock case with automatic deadlocking latchbolt for the active side of wooden doors with two blades.

The door is opened from outside with a lever handle.

The lock case fulfils the requirements of the European standard for exit products SFS-EN179 and SFS-EN1125 and the requirements of the lock case standard SFS-EN12209.

The lock is always opened from the inside by a lever handle, push pad or panic bar.

The latchbolt protrudes 14 mm.

Deadlocking is controlled by a snib in the front plate.

Using of the snib is normally blocked.

The snib is released by turning the key.

Snib position:

UP = Deadlocking

The lock can be opened from outside by key only and from inside by a lever handle, push pad or panic bar.

DOWN = Day latching, the lock can be opened from outside by lever handle also

LE181X is the microswitch version of the lock.

The switch changes the status when latchbolt is deadlocked.

Passive lock case

EXH911, EXB911, EXH915

Finish

Fe/ZL

Cylinder

ABLOY. C, N, T, U

Fire resistance:

Wooden doors EI115 - EI130 and EI215 – EI230,

Metal doors EI115 - EI1120 and EI215 – EI2120

Mortise standard

OneFit Mortise